Toyota Tundra 2005 Service - Repair - Maintenance page 3430

Hide thumbs Also See for Tundra 2005:

Table of Contents

AIR CONDITIONING

Reassembly is in the reverse order of disassembly

AFTER REASSEMBLY, CHECK MAGNETIC CLUTCH

Dial Indicator

If the clearance is not within the standard range, adjust the

clearance using shims to obtain the standard clearance.

COMPRESSOR AND MAGNETIC CLUTCH (2UZ-FE)

Set the dial indicator to the pressure plate of the magnetic

Connect the magnetic clutch lead wire to the positive (+)

terminal of the battery.

Check the clearance between the pressure plate and ro-

tor when connecting the negative (-) terminal to the bat-

Standard clearance:

0.5 ± 0.15 mm (0.020 ± 0.0059 in.)

Standard thickness:

0.1 mm (0.004 in.)

0.3 mm (0.012 in.)

0.5 mm (0.020in.)