Toyota Tundra 2005 Service - Repair - Maintenance page 3440

Water Valve
Fr
Hose Clip Water Hose
RH
Heater Radiator Pipe
AIR CONDITIONING
REMOVAL
1.
HINT:
It is not necessary to drain out all the coolant.
2.
HINT:
At the time of installation, refer to the following:
After connection, adjust the control cable (See page
I11139
3.
(a)
(b)
I11140
HINT:
Upper
At the time of installation, refer to the following:
Rr
z
z
LH
Lower
z
I11199
4.
Remove the bolt and water valve.
I11141
- WATER VALVE
DRAIN ENGINE COOLANT FROM RADIATOR
DISCONNECT WATER VALVE CONTROL CABLE
FROM WATER VALVE
DISCONNECT WATER HOSES
Using pliers, grip the claws of the hose clips and slide the
hose clips along the hoses.
Disconnect the water hoses.
Heater radiator pipe:
Push the water hose onto the heater radiator pipe up to
the second ridge on the pipe.
Water valve:
Push the water hose onto the water valve pipe up to the
water valve.
Install the hose clip in the position shown in the illustra-
tion.
REMOVE WATER VALVE
Author :
AC-75
AC27B-03
AC-105
Date :
5102
).