Toyota Tundra 2005 Service - Repair - Maintenance page 3437

AC-72
Access Cab, Standard Cab:
Double Cab:
Access Cab, Standard Cab:
Double Cab:
AIR CONDITIONING - CONDENSER
7. DISCONNECT LIQUID TUBE AND DISCHARGE HOSE
Remove the 2 bolts and disconnect both tube and hose.
Torque:10 N·m (100 kgf·cm, 7 ft·lbf)
NOTICE:
Cap the openings immediately to keep moisture or dirt out
of the system.
HINT:
At the time of installation, refer to the following:
Lubricate 2 new O-rings with compressor oil and install them
I11186
to the tubes.
I27023
8. REMOVE CONDENSER
(a) Remove the 2 bolts and 2 lower brackets.
(b) Remove the 4 bolts and 2 upper brackets.
(c) Pull the condenser forward and then upward.
HINT:
At the time of installation, refer to the following:
If the condenser is replaced, add compressor oil to the com-
pressor.
Add 40 to 50 cc (1.4 to 1.7 fl.oz.)
I11187
Compressor oil: ND-OIL 8 or equivalent
I27024
Author : Date :
5099