Show Isis Database - Dell PowerConnect J-EX4200-24T Software Manual

show isis database

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show isis database
<brief | detail | extensive>
<instance instance-name>
<level (1 | 2)>
<logical-system (all | logical-system-name)>
show isis database
<brief | detail | extensive>
<level (1 | 2)>
<instance instance-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the entries in the Intermediate System-to-Intermediate System (IS-IS) link-state
database, which contains data about PDU packets.
none —Display standard information about IS-IS link-state database entries for all routing
instances.
—(Optional) Display the specified level of output.
brief | detail | extensive
instance instance-name —(Optional) Display entries for the specified routing instance.
—(Optional) Display entries for the specified IS-IS level.
level (1 | 2)
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear isis database on page 1762
show isis database on page 1845
show isis database brief on page 1845
show isis database detail on page 1846
show isis database extensive on page 1847
show isis database extensive (CLNS) on page 1848
Table 223 on page 1844 describes the output fields for the
Output fields are listed in the approximate order in which they appear. Fields that contain
internal IS-IS information useful only in troubleshooting obscure problems are not
described in the table. For more details about these fields, contact your customer support
representative.
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show isis database command.
1843