Access-Class - Dell S6100 Configuration Manual

The re-authentication is also applicable for authenticated 802.1x devices. When there is a change in the
authentication servers, the supplicants connected to all the ports are forced to re-authenticate.
Example
Dell(config)#aaa reauthenticate enable
Dell(config)#aaa authentication login vty_auth_list radius
Force all logged-in users to re-authenticate (y/n)?
Dell(config)#radius-server host 192.100.0.12
Force all logged-in users to re-authenticate (y/n)?

access-class

Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-name
Defaults Not configured.
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.2.1.1
Related Commands
•
•
•
1392 Security
Enter the name of an established IP Standard ACL.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
line — applies an authentication method list to the designated terminal lines.
ip access-list standard — names (or selects) a standard access list to filter based on the IP address.
ip access-list extended — names (or selects) an extended access list based on the IP addresses or protocols.