Authorization And Privilege Commands - Dell S6100 Configuration Manual

Authorization and Privilege Commands

To set command line authorization and privilege levels, use the following commands.
authorization
Apply an authorization method list to terminal lines.
Syntax authorization {exec | commands {level | role role-name}} method-list
Parameters
exec
commands {level |
role role-name}
method-list
Defaults none
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.3.1.0
Enter the keyword exec to apply an EXEC level authorization method list.
Enter the keyword commands followed by either a privilege level for accounting of
commands executed at that privilege level, or enter the keyword role then the role
name for authorization of commands executed by a user with that user role.
Enter a method list that you defined using the aaa accounting exec or aaa
accounting commands.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Added support for roles on the Z9000, S6000, S4820T, S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Security 1381