4
Disassembly/Assembly > Image Forming System > Removing the Registration Unit
Removing the Registration Unit
Preparations
1) Removing the Right Cover.
2) Removing the Left Cover.
3) Removing the Controller Cover.
4) Removing the Left Rear Cover.
5) Removing the ADF + Reader Unit.
6) Removing the Upper Cover.
Procedure
1) Remove the Gear [1].
• 1 Claw [2]
[1]
4
Disassembly/Assembly > Image Forming System > Removing the Registration Unit
[2]
F-4-149
2) Remove the Guide [1].
• 2 Claws [2]
[2]
x2
3) Remove the Registration Unit [1].
• 5 Screws [2]
• 1 Gear Cover [3]
x5
[2]
4-60
[2]
[1]
F-4-150
[1]
[2]
[3]
[2]
F-4-151
4-60