2.6.9 Removing the Registration Roller Unit
1) Remove the image processor PCB. (See
2.2.1)
2) Remove the plastic film [1].
3) Using long nose pliers or the like, pick
the hook [2], and detach the registration
roller gear [3].
When removing the gear, be
sure to take care not to break
the claw.
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
CHAPTER 5 MECHANICAL SYSTEM
[1]
F05-206-21
[2]
F05-206-22
[3]
5-45