Specifications/Configuration - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Main Controller > Overview > Specifications/configuration

■ Specifications/configuration

● PCBs
Main Controller PCB 1
Main Controller PCB 2
HDD(Option)
HDD(Standard)
TPM PCB
Flash PCB
Parts name Function, specifications, features
Main controller CPU: 1.2GHz, Control of the entire system
PCB 1 Various controls (HDD control,memory, control panel, electric power, voice), I/Fs
(PCI, USB(host),USB(devise),LAN), RTC
Flash PCB Boot program
TPM PCB To generate and save encryption key
Available only when TPM settings is ON: Management Settings > Data
Management > TPM Settings (default: OFF)
Not available with China models
Main controller CPU: 400 MHz, Image control
PCB 2 Image processing (resolution conversion, image rotation, halftone process, scanner
image process, printer image process, compression/decompression, decoding, direct
mapping, image area determination, generation of histogram,Trimming,Masking) ,
USB(devise) control,I/F (Reader, Printer,FAX,HDD,Power supply)
HDD 2.5 inch SATA I/F Standard: 80 GB
Up to 2 HDDs can be mounted in the case of mirroring configuration.
BOX data, Address book, security information (password, certificate)
Op.: (2.5inch / 80GB)HDD-C1, (2.5inch / 250GB)HDD-D1
2 Technology > Main Controller > Overview > Specifications/configuration
● Memory
Main controller PCB 1
F-2-7
Parts name
DDR2-SDRAM 2 slot / 1GB (standard)
J2031: 512 MB
J2032: 512 MB
Clock frequency: 333 MHz
Used for saving image, program data
Lithium battery For RTC
(BAT1) Life: approx. 10 years
T-2-1
J2032
J2031
BAT1
DDR2-SDRAM
512MB+512MB
Function, specifications, features
2-7
F-2-8
T-2-2
2-7