r0158
DRIVE-CLiQ Hub Module firmware version / Hub FW version
HUB
Can be changed: -
Data type: Unsigned32
P-Group: Terminals
Not for motor type: -
Min
-
Description:
Displays the firmware version of the DRIVE-CLiQ Hub Module.
r0158
Terminal Module firmware version / TM FW version
TM150, TM31,
Can be changed: -
TM54F_MA,
Data type: Unsigned32
TM54F_SL
P-Group: Terminals
Not for motor type: -
Min
-
Description:
Displays the firmware version of the Terminal Module.
Dependency:
Refer to: r0018, r0128, r0148, r0197, r0198
Note:
Example:
The value 1010100 should be interpreted as V01.01.01.00.
r0158[0...n]
Voltage Sensing Module firmware version / VSM FW version
VECTOR_G
Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Not for motor type: -
Min
-
Description:
Displays the firmware version of the Voltage Sensing Module (VSM).
Dependency:
Refer to: r0018, r0128, r0197, r0198
Note:
Example:
The value 1010100 should be interpreted as V01.01.01.00.
p0161
Option board component number / Opt board comp_no
TB30
Can be changed: C1(4)
Data type: Unsigned8
P-Group: Data sets
Not for motor type: -
Min
0
Description:
Sets the component number for the option board (e.g. Terminal Board 30).
This unique component number is assigned when parameterizing the topology.
Only component numbers can be entered into this parameter that correspond to an option board.
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: p0150
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
199
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
95