Si Motion User Agreement Selection/De-Selection / Si Mtn Useragr Sel; Si Motion User Agreement Inside The Drive / Si Mtn Useragr Int; Si Motion Actual Checksum Si Parameters / Si Mtn Act Crc; Si Motion Reference Checksum Si Parameters / Si Mtn Ref Crc - Siemens SINAMICS G150 Manual

p9726

SI Motion user agreement selection/de-selection / SI Mtn UserAgr sel

VECTOR_G Can be changed: U, T
Data type: Integer16
P-Group: Safety Integrated
Not for motor type: -
Min
0000 hex
Description: Setting to select and de-select the user agreement.
Value: 0:
172:
Dependency: Refer to: r9727
r9727

SI Motion user agreement inside the drive / SI Mtn UserAgr int

VECTOR_G Can be changed: -
Data type: Integer16
P-Group: Safety Integrated
Not for motor type: -
Min
-
Description: Displays the internal state of the user agreement.
Value = 0: User agreement is not set.
Value = AC hex: User agreement is set.
Dependency: Refer to: p9726
r9728[0...2]

SI Motion actual checksum SI parameters / SI Mtn act CRC

VECTOR_G Can be changed: -
Data type: Unsigned32
P-Group: Safety Integrated
Not for motor type: -
Min
-
Description: Displays the checksum over the checked Safety Integrated parameters of the motion monitoring functions (actual
checksum).
Index: [0] = Checksum over SI parameters for motion monitoring
[1] = Checksum over SI parameters for actual values
[2] = Checksum over SI parameters for hardware
Dependency: Refer to: p9729
p9729[0...2]

SI Motion reference checksum SI parameters / SI Mtn ref CRC

VECTOR_G Can be changed: C2(95)
Data type: Unsigned32
P-Group: Safety Integrated
Not for motor type: -
Min
0000 hex
Description: Sets the checksum using the checksum-tested Safety Integrated parameters for motion monitoring functions
(reference checksum).
Index: [0] = Checksum over SI parameters for motion monitoring
[1] = Checksum over SI parameters for actual values
[2] = Checksum over SI parameters for hardware
Dependency: Refer to: r9728
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
[00 hex] De-select user agreement
[AC hex] Select user agreement
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
00AC hex
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
FFFF FFFF hex
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0000 hex
Access level: 3
Func. diagram: 2822
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0000 hex
921