Friction Characteristic Value N8 / Friction N8; Friction Characteristic Value N9 / Friction N9; Friction Characteristic Value M0 / Friction M0; Friction Characteristic Value M1 / Friction M1 - Siemens SINAMICS G150 Manual
Drive converter chassis
Hide thumbs
Also See for SINAMICS G150:
- Operating instructions manual (680 pages) ,
- Operating manual (240 pages) ,
- Reference manual (38 pages)
Table of Contents
Advertisement
p3828[0...n]
Friction characteristic value n8 / Friction n8
VECTOR_G (n/M)
Can be changed: T
Data type: FloatingPoint32
P-Group: Functions
Not for motor type: REL
Min
0.00 [rpm]
Description:
The friction characteristic is defined by 10 value pairs.
This parameter specifies the n coordinate of the 9th value pair of the friction characteristic.
Dependency:
Refer to: p3838, p3845
p3829[0...n]
Friction characteristic value n9 / Friction n9
VECTOR_G (n/M)
Can be changed: T
Data type: FloatingPoint32
P-Group: Functions
Not for motor type: REL
Min
0.00 [rpm]
Description:
The friction characteristic is defined by 10 value pairs.
This parameter specifies the n coordinate of the 10th value pair of the friction characteristic.
Dependency:
Refer to: p3839, p3845
p3830[0...n]
Friction characteristic value M0 / Friction M0
VECTOR_G (n/M)
Can be changed: T
Data type: FloatingPoint32
P-Group: Functions
Not for motor type: REL
Min
-1000000.00 [Nm]
Description:
The friction characteristic is defined by 10 value pairs.
This parameter specifies the M coordinate of the 1st value pair of the friction characteristic.
Dependency:
Refer to: p3820, p3845
p3831[0...n]
Friction characteristic value M1 / Friction M1
VECTOR_G (n/M)
Can be changed: T
Data type: FloatingPoint32
P-Group: Functions
Not for motor type: REL
Min
-1000000.00 [Nm]
Description:
The friction characteristic is defined by 10 value pairs.
This parameter specifies the M coordinate of the 2nd value pair of the friction characteristic.
Dependency:
Refer to: p3821, p3845
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
Calculated:
CALC_MOD_LIM_REF
Dyn. index: DDS, p0180
Units group: 3_1
Scaling: -
Max
210000.00 [rpm]
Calculated:
CALC_MOD_LIM_REF
Dyn. index: DDS, p0180
Units group: 3_1
Scaling: -
Max
210000.00 [rpm]
Calculated: -
Dyn. index: DDS, p0180
Units group: 7_1
Scaling: -
Max
1000000.00 [Nm]
Calculated: -
Dyn. index: DDS, p0180
Units group: 7_1
Scaling: -
Max
1000000.00 [Nm]
2 Parameters
2.2 List of parameters
Access level: 2
Func. diagram: 7010
Unit selection: p0505
Expert list: 1
Factory setting
1500.00 [rpm]
Access level: 2
Func. diagram: 7010
Unit selection: p0505
Expert list: 1
Factory setting
3000.00 [rpm]
Access level: 2
Func. diagram: 7010
Unit selection: p0505
Expert list: 1
Factory setting
0.00 [Nm]
Access level: 2
Func. diagram: 7010
Unit selection: p0505
Expert list: 1
Factory setting
0.00 [Nm]
583
Hide quick links:
Advertisement
Table of Contents
