Bios/Eeprom Data Version / Bios/Eeprom Vers; Drive Object Name / Do Name; Power Unit Code Number Actual / Pu Code No. Act; Power Unit Code Number / Pu Code No - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
Dependency: Refer to: r0018, r0128, r0148, r0158, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
r0198[0...2]

BIOS/EEPROM data version / BIOS/EEPROM vers

CU_G130_DP, Can be changed: -
CU_G130_PN,
Data type: Unsigned32
CU_G150_DP,
P-Group: Closed-loop control
CU_G150_PN
Not for motor type: -
Min
-
Description: Displays the BIOS and EEPROM data version.
r0198[0]: BIOS version
r0198[1]: EEPROM data version EEPROM 0
r0198[2]: EEPROM data version EEPROM 1
Dependency: Refer to: r0018, r0128, r0148, r0158, r0197
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
p0199[0...24]

Drive object name / DO name

All objects Can be changed: C1
Data type: Unsigned16
P-Group: -
Not for motor type: -
Min
0
Description: Freely assignable name for a drive object.
In the commissioning software, this name cannot be entered using the expert list, but is specified in the configuration
assistant. The object name can be subsequently modified in the Project Navigator using standard Windows
resources.
Note: The parameter is not influenced by setting the factory setting.
r0200[0...n]

Power unit code number actual / PU code no. act

B_INF, VECTOR_G Can be changed: -
Data type: Unsigned16
P-Group: Converter
Not for motor type: -
Min
-
Description: Displays the unique code number of the power unit.
Note: r0200 = p0201: No power unit found
For parallel circuit configurations, the parameter index is assigned to a power unit.
p0201[0...n]

Power unit code number / PU code no

B_INF Can be changed: C2(2)
Data type: Unsigned16
P-Group: Converter
Not for motor type: -
Min
0
Description: Sets the actual code number from r0200 to acknowledge the power unit being used.
When commissioned for the first time, the code number is automatically transferred from r0200 into p0201.
100
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
65535
Calculated: -
Dyn. index: PDS, p0120
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: PDS, p0120
Units group: -
Scaling: -
Max
65535
List Manual (LH2), 04/2014, A5E03263479A
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 2
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
SINAMICS G130/G150