Overview Of Parameters; Explanation Of The Parameter List; Basic Structure Of The Parameter Descriptions - Siemens SINAMICS G150 Manual

2 Parameters

2.1 Overview of parameters

2.1 Overview of parameters
2.1.1

Explanation of the parameter list

Basic structure of the parameter descriptions

The data in the following example has been chosen at random. The table below contains all
the information that can be included in a parameter description. Some of the information is
optional.
The "List of parameters" (Page 33) has the following structure:
- - - - - - - - - - - - Start of example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
pxxxx[0...n] BICO: Full parameter name / abbreviated name
Drive object Can be changed: C1(x), C2(x), U, T
(function module)
Data type: Unsigned32 / Integer16
P-Group: Closed-loop control
Not for motor type: FEM
Min
0.00 [Nm]
Description: Text
Value: 0:
1:
2:
etc.
Recommendation: Text
Index: [0] = Name and meaning of index 0
[1] = Name and meaning of index 1
[2] = Name and meaning of index 2
etc.
Bit field: Bit
00
01
02
Dependency: Text
Refer to: pxxxx, rxxxx
Refer to: Fxxxxx, Axxxxx
Danger: Warning:
Notice:
Note: Information that might be useful.
- - - - - - - - - - - - End of example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The individual pieces of information are described in detail below.
16
Name and meaning of value 0
Name and meaning of value 1
Name and meaning of value 2
Signal name
Name and meaning of bit 0
Name and meaning of bit 1
Name and meaning of bit 2
etc.
Caution:
Calculated: CALC_MOD_REG
Dyn. index: CDS, p0170
Unit group: 7_1
Scaling: p2000
Max
10.00 [Nm]
1 signal
Yes
Yes
Yes
Safety notices with a warning triangle
Safety notice without a warning triangle
List Manual (LH2), 04/2014, A5E03263479A
Access level: 2
Func. diagram: 8070
Unit selection: p0505
Expert list: 1
Factory setting
0.00 [Nm]
0 signal
no
no
no
SINAMICS G130/G150
FP
8060
8065