Not For Motor Type; Scaling; Expert List - Siemens SINAMICS G150 Manual

2 Parameters
2.1 Overview of parameters

Not for motor type

Specifies for which motor type this parameter has no significance.
ASM: Asynchronous Motor
FEM: Separately excited synchronous motor
PEM: Permanent-magnet synchronous motor
REL: Reluctance motor/SIEMOSYN motor

Scaling

Specification of the reference variable with which a signal value is automatically converted for
a BICO interconnection.
The following reference variables are available:
• p2000 ... p2007: Reference speed, reference voltage, etc.
• PERCENT: 1.0 = 100 %
• 4000H: 4000 hex = 100 %

Expert list

Specifies whether this parameter is available in the expert list of the specified drive objects in
the commissioning software.
1: Parameter exists in the expert list.
0: Parameter does not exist in the expert list.
NOTICE
Users assume full responsibility for using parameters marked "Expert list: 0" (parameter does
not exist in the expert list).
These parameters and their functionalities have not been tested and no further user
documentation is available for them (e.g. description of functions). Moreover, no support is
provided for these parameters by "Technical Support" (hotline).
Description
Explanation of the function of a parameter
Values
Lists the possible values of a parameter.
Recommendation
Information about recommended settings.
28
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A