Commissioning
5.3 Creating a project offline
Result
You have made the detailed settings for the selected encoder in your device configuration.
5.3.9
Inserting additional system components
The following components can be inserted additionally in the device configuration of your drive:
• DRIVE-CLiQ Hub Module DMC20 / DME20
• Communication Board CBE20
• Terminal Module
• Terminal Board TB30
• Voltage Sensing Module VSM10
Since the procedures for inserting the components into the device configuration are different,
they are described individually in the following.
5.3.9.1
Inserting a DRIVE-CLiQ Hub Module
Overview
DRIVE-CLiQ Hub Modules are used to extend and/or multiply DRIVE-CLiQ sockets. The following
Hub Modules (star coupler) are available:
• DMC20 (DRIVE-CLiQ Hub Module Cabinet):
– Expansion module for star-shaped distribution of a DRIVE-CLiQ line. Using the DMC20,
– The DMC20 can be snapped onto a mounting rail according to EN 60715.
• DME20 (DRIVE-CLiQ Hub Module External):
– Expansion module for star-shaped distribution of a DRIVE-CLiQ line. Using the DME20,
– The DME20 is designed for applications where DRIVE-CLiQ devices are removed in groups
– The DME20 has degree of protection IP67.
In the Startdrive engineering tool, the "DRIVE-CLiQ HUB Module DMx20" term is generally used
for all Hub Modules.
Further information
You can find further information about the Hub Modules in the "Control Units and Additional
System Components" Manual. When commissioning the system, take into consideration and
comply with the safety instructions there.
146
you expand an axis grouping by 5 DRIVE-CLiQ sockets for additional subgroups.
you expand an axis grouping by 5 DRIVE-CLiQ sockets for additional subgroups.
without interrupting the DRIVE-CLiQ line and data exchange along the line.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2