Industrial Security - Siemens SINAMICS G150 Manual

1.2

Industrial security

Note
Industrial security
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, devices, and/or networks. They are important
components of a holistic industrial security concept. With this in mind, Siemens' products and
solutions undergo continuous development. Siemens recommends strongly that you regularly
check for product updates.
To ensure that Siemens products and solutions are operated securely, suitable preventive
measures (e.g. cell protection concept) and each component must be integrated into a state-
of-the-art holistic industrial security concept. Third-party products that may be in use should
also be considered. You will find more information about industrial security at:
http://www.siemens.com/industrialsecurity
To receive information about product updates on a regular basis, register for our product
newsletter. You will find more information at:
http://support.automation.siemens.com
Danger as a result of unsafe operating states resulting from software manipulation
Software manipulation (e.g. by viruses, Trojan horses, malware, worms) can cause unsafe
operating states to develop in your installation which can result in death, severe injuries
and/or material damage.
• Keep the software up to date.
• Incorporate the automation and drive components into a holistic, state-of-the-art industrial
• Make sure that you include all installed products into the holistic industrial security
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
WARNING
Information and newsletters can be found at:
http://support.automation.siemens.com
security concept for the installation or machine.
For more information, visit:
http://www.siemens.com/industrialsecurity
concept.
1 Fundamental safety instructions
1.2 Industrial security
13