Sensor Module Eeprom Data Version / Sm Eeprom Version; Sensor Module Firmware Version / Sm Fw Version; Number Of Vsm Data Sets / Vsm Dat_Sets Qty.; Drive-Cliq Hub Module Component Number / Hub Comp_No - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
Value: 0:
1:
Dependency: Refer to: p0105, p0145, p0480, p0897
r0147[0...n]

Sensor Module EEPROM data version / SM EEPROM version

ENC, VECTOR_G Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Not for motor type: -
Min
-
Description: Displays the version of the EEPROM data of the Sensor Module.
Dependency: Refer to: r0127, r0157
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
r0148[0...n]

Sensor Module firmware version / SM FW version

ENC, VECTOR_G Can be changed: -
Data type: Unsigned32
P-Group: Encoder
Not for motor type: -
Min
-
Description: Displays the firmware version of the Sensor Module.
Dependency: Refer to: r0018, r0128, r0158, r0197, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
p0150

Number of VSM data sets / VSM dat_sets qty.

VECTOR_G Can be changed: C1(3)
Data type: Unsigned8
P-Group: Data sets
Not for motor type: -
Min
1
Description: Sets the number of VSM data sets.
p0151[0...1]

DRIVE-CLiQ Hub Module component number / Hub comp_no

HUB Can be changed: C1(4)
Data type: Unsigned8
P-Group: Data sets
Not for motor type: -
Min
0
Description: This parameter is used to assign the data set to a DRIVE-CLiQ Hub Module.
This unique component number is assigned when parameterizing the topology.
Only the numbers of components operated as hubs can be entered in these parameters.
[0] = DRIVE-CLiQ node 1
[1] = DRIVE-CLiQ node 2
92
Component inactive
Component active
Calculated: -
Dyn. index: EDS, p0140
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: EDS, p0140
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
2
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
199
List Manual (LH2), 04/2014, A5E03263479A
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
1
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
SINAMICS G130/G150