Number Ranges Of Parameters; Number Ranges For Sinamics - Siemens SINAMICS G150 Manual

2 Parameters
2.1 Overview of parameters
Caution
Notice
Note
2.1.2

Number ranges of parameters

Note
The following number ranges represent an overview for all the parameters available for the
SINAMICS drive family.
The parameters for the product described in this List Manual are described in detail in "List of
parameters" (Page 33).
Parameters are grouped into the following number ranges:
Table 2-7
30
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
Information that the user may find useful.

Number ranges for SINAMICS

Range
From To
0000 0099
0100 0199
0200 0299
0300 0399
0400 0499
0500 0599
0600 0699
0700 0799
0800 0839
0840 0879
0880 0899
0900 0999
1000 1199
1200 1299
1300 1399
1400 1799
Display and operation
Commissioning
Power section
Motor
Encoder
Technology and units, motor-specific data, probes
Thermal monitoring, maximum current, operating hours, motor data,
central probe
Control Unit terminals, measuring sockets
CDS, DDS data sets, motor changeover
Sequence control (e.g. signal source for ON/OFF1)
ESR, parking, control and status words
PROFIBUS/PROFIdrive
Setpoint channel (e.g. ramp-function generator)
Functions (e.g. motor holding brake)
U/f control
Closed-loop control
Description
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A