Show Ipv6 Interface Out-Of-Band - Dell Networking 2024 Reference Manual

show ipv6 interface out-of-band

Use the show ipv6 interface out-of-band command in Privileged EXEC mode
to show the IPv6 out-of-band port configuration.
Syntax
show ipv6 interface out-of-band
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console(config-if)#do show ipv6 interface out-of-band
IPv6 Administrative Mode........Enabled
IPv6 Prefix is..................FE80::21E:C9FF:FEAA:AD79/64
::/128
IPv6 Default Router.............FE80::A912:FEC2:A145:FEAD
Configured IPv6 Protocol........None
IPv6 AutoConfiguration mode............Enabled
Burned In MAC Address...........001E.C9AA.AD79
496
IP Addressing Commands