Neighbor Remove-Private-As - Dell Z9500 Command Reference Manual

Related router bgp
Commands

neighbor remove-private-as

Remove private AS numbers from the AS-PATH of outgoing updates.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} remove-private-as
To return to the default, use the no neighbor {ipv6-address | peer-
group-name} remove-private-as command.
Parameters
ipv6-address
peer-group-
name
Defaults Disabled (that is, private AS number are not removed).
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
Applies to EBGP neighbors only.
Information
If the AS-PATH contains both public and private AS number or contains AS
numbers of an EBGP neighbor, the private AS numbers are not removed.
If a confederation contains private AS numbers in its AS-PATH, the software
removes the private AS numbers only if they follow the confederation numbers in
the AS path.
Private AS numbers are 64512 to 65535.
Border Gateway Protocol
– Enter ROUTER BGP mode and configure routes in an AS.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to remove the private AS
numbers.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
549