Neighbor Peer-Group (Creating Group) - Dell Z9500 Command Reference Manual

peer-group
peer-group-
name
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
You can assign up to 64 peers to one peer group.
Information
When you add a peer to a peer group, it inherits all the peer group's configured
parameters. A peer cannot become part of a peer group if any of the following
commands are configured on the peer:
•
•
•
•
•
A neighbor may keep its configuration after it was added to a peer group if the
neighbor's configuration is more specific than the peer group's, and the neighbor's
configuration does not affect outgoing updates.
A peer group must exist before you add a peer to it. If the peer group is disabled
(shutdown), the peers within the group are also disabled (shutdown).
Related
•
Commands
•
•
•

neighbor peer-group (creating group)

Allows you to create a peer group and assign it a name.
Z9500
Syntax
neighbor peer-group-name peer-group
546
Enter the keywords peer-group followed by the name of a
configured peer group. The maximum is 16 characters.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
neighbor advertisement-interval
neighbor distribute-list
neighbor route-map
neighbor route-reflector-client
neighbor send-community
clear ip bgp – resets BGP sessions.
neighbor peer-group (creating group)
show ip bgp peer-group
show ip bgp neighborsshow ip bgp neighbors View BGP neighbors
configurations.
– creates a peer group.
– view BGP peers.
Border Gateway Protocol