Avaya Communication Manager Administrator's Manual page 754

Screen Reference
Data modules
An ADU cannot be used if the printer has hardware flow control using the Clear To Send (CTS) lead. An
ADU can be used, however, if the printer is using software flow control.
A printer connected to a DLC is usually assigned as a line.
connection, on page 754 lists the option settings for printer connections.
Table 12: DLDM screen settings for printer connection
Field on screen
Speed
KYBD Dialing
Busy Out
Permit Mismatch
Parity
Dial Echoing
Disconnect
Sequence
Answer Text
Connected
Indication
Configuration
Non-intelligent terminals
A non-intelligent terminal connected to the DLC usually is assigned as a line.
settings for connection to non-intelligent terminals,
non-intelligent terminals.
Table 13: DLDM screen settings for connection to non-intelligent terminals 1 of 2
Field On screen
Speed
KYBD Dialing
Busy Out
Permit Mismatch
754
Option Comments
Highest speed at Subject to distance limitations;
which the Printer Autoadjust not used
operates
no
yes If printer is member of Hunt
Group
yes No, if printer is low speed
- Don't care
- Don't care
- Don't care
- Don't care
- Don't care
no
on page 754 lists the option settings for
Option Comments
All speeds at which Subject to distance limitations;
the terminal can Autoadjust when the
operate; autoadjust field is y and the Terminal can
generate an ASCII "return"
yes
no Yes, if terminal is member of a hunt
group
yes -
Administrator's Guide for Avaya Communication Manager
Table 12, DLDM screen settings for printer
Table 13, DLDM screen
KYBD Dialing
1 of 2
November 2003