Multicast Routing Commands; Network Time Protocol Commands; Ospf Commands; Ospfv3 Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

AOS Release 6 to AOS Release 7
AOS Release 6
show lldp [<slot | slot/port>] config
show lldp [<slot | slot/port>] statistics

Multicast Routing Commands

AOS Release 6
no change

Network Time Protocol Commands

AOS Release 6
no change

OSPF Commands

AOS Release 6
ip ospf status {enable | disable}
ip ospf interface {interface_name} status {enable |
disable}
ip ospf restart-helper [status {enable | disable}]
ip ospf restart-helper strict-lsa-checking status
{enable | disable}

OSPFv3 Commands

AOS Release 6
ipv6 ospf status {enable | disable}
ipv6 ospf interface interface_name status {enable |
disable}

PIM Commands

AOS Release 6
ip pim sparse status {enable | disable}
ip pim dense status {enable | disable}
ip pim spt status {enable | disable}
page B-14
AOS Release 7
show lldp [port <slot/port[-port]> | slot <slot>]
config
show lldp [port <slot/port[-port]> | slot <slot>] sta-
tistics
AOS Release 7
no change
AOS Release 7
no change
AOS Release 7
ip ospf admin-state {enable | disable}
ip ospf interface {<interface_name>} admin-state
{enable | disable}
ip ospf restart-helper [admin-state {enable | dis-
able}]
ip ospf restart-helper strict-lsa-checking admin-
state {enable | disable}
AOS Release 7
ipv6 ospf admin-state {enable | disable}
ipv6 ospf interface interface_name admin-state
{enable | disable}
AOS Release 7
ip pim sparse admin-state {enable | disable}
ip pim dense admin-state {enable | disable}
ip pim spt admin-state {enable | disable}
OmniSwitch CLI Reference Guide
CLI Change Guidelines
March 2011