Ethernet Port Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

AOS Release 6 to AOS Release 7

Ethernet Port Commands

AOS Release 6
interfaces {<slot> | <slot/port[-port2]>}
{admin | autoneg } {enable|disable}
trap slot[/port[-port2]] port link {enable | dis-
able | on | off}
interfaces slot[/port[-port2]] speed {auto | 10 |
100 | 1000 | 10000 | max {100 | 1000}}
n/a
interfaces {<slot> | <slot/port[-port2]>} no l2
statistics [cli]
interfaces {<slot> | <slot/port[-port2]>} port
{<string> | <num>}
interfaces transceiver ddm [trap] {enable | dis-
able}
n/a
show interfaces [<slot> | <slot/port[-port2]>]
{status | capability | flood rate | port | account-
ing | counters | traffic | pause}
n/a
show interfaces transceiver [<slot> | <slot/
port[-port2]>] transceiver [ddm | w-low | w-
high | a-low | a high | actual]
show interfaces [<slot> | <slot/port[-port]>]
port
interfaces slot[/port[-port2]] hybrid
show interfaces [slot[/port[-port2]]] hybrid
interfaces {<slot> | <slot/port[-port2]>} {ifg
<num> | flow {enable | disable} | clear-viola-
tion-all | runt <num> | runtsize <num> | regis-
ter {lwm | dyncell} regval <num> | pause}
intefaces [no] e2e-flow-vlan
interfaces cli-prompt {enable | disable}
10gig slot <slot> {phys-a | phys-b}
show interfaces [<slot> | <slot/port[-port2]>]
{e2e-flow-vlan | flow | collisions | ifg | register
{lwm | dyncell}}
show 10gig [slot <slot>]
page B-8
AOS Release 7
interfaces {<slot> | <slot/port[-port2]>} {admin-state |
autoneg } {enable|disable}
interfaces {<slot> | <slot/port1[-port2]>} link-trap
{enable|disable}
interfaces {<slot> | <slot/port1[-port2]>} speed {10 | 100
| 1000 | auto | max {100 | 1000}}
interfaces {<slot> | <slot/port1[-port2]>]} flood-limit
{bcast|mcast|uucast|all} rate { pps <num> | mbps <num> |
cap% <num> | enable | disable}
clear interfaces {<slot> | <slot/port1[-port2]>} l2-statis-
tics [cli]
interfaces {<slot> | <slot/port1[-port2]>} alias {<string> |
<num>}
interfaces ddm[-trap] {enable | disable}
interfaces {<slot> | <slot/port1[-port2]>} ingress-band-
width {mbps <num> [burst <mbits>] | enable | disable}
show interfaces [<slot> | <slot/port1[-port2]>] {status |
capability | flood-rate | port | accounting | counters [errors]
| traffic}
show interfaces [<slot> | <slot/port1[-port2]>] ingress-
rate-limit
show interfaces [<slot> | <slot/port1[-port2]>] ddm [w-
low | w-high | a-high | a-low | actual | status]
show interfaces [<slot> | <slot/port[-port]>] alias
removed
removed
removed
removed
removed
removed
removed
removed
OmniSwitch CLI Reference Guide
CLI Change Guidelines
March 2011