Ip Slb Probe Port - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Server Load Balancing Commands

ip slb probe port

Configures the TCP/UDP port on which the Server Load Balancing (SLB) probe is sent.
ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp}
port port_number
Syntax Definitions
probe_name
ftp
http
https
imap
imaps
nntp
ping
pop
pops
smtp
tcp
udp
port_number
Defaults
parameter
port_number
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip slb probe mis_server udp port 200
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies an FTP probe.
Specifies an HTTP probe.
Specifies an HTTPS probe.
Specifies an IMAP probe.
Specifies an IMAPS probe.
Specifies an NNTP probe.
Specifies a ping probe.
Specifies a POP probe.
Specifies a POPS probe.
Specifies an SMTP probe.
Specifies a TCP probe.
Specifies a UDP probe.
Specifies the TDP/UDP port number.
default
0
March 2011
ip slb probe port
page 20-23