Ipv6 Bgp Neighbor Ipv6-Nexthop - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ipv6 bgp neighbor ipv6-nexthop

Configures the IPv6 next hop addresses for IPv6 prefixes advertised between BGP peers. These BGP
peers are identified by their IPv6 addresses.
ipv6 bgp neighbor ipv6_address [ipv6-nexthop ipv6_address]
Syntax Definitions
ipv6_address
Defaults
By default, the IPv6 next hop address is set to all zeros.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
To reset the IPv6 next hop value, enter an all-zero address.
•
For internal BGP (IBGP) peers, the IPv6 next hop is used only if the peer next-hop-self option is
configured.
•
For external BGP (EBGP) peers, the IPv6 next hop is used for all the advertised IPv6 routes.
•
For BGP peers configured with their link-local addresses, the configured IPv6 next hop is used while
advertising IPv6 prefixes.
Examples
-> ipv6 bgp neighbor 2001::1 ipv6-nexthop fe80::/24
-> no ipv6 bgp neighbor 2001::1 ipv6-nexthop fe80::/24
Release History
Release 7.1.1; command was introduced.
Related Commands
show ipv6 bgp neighbors
MIB Objects
alaBgpPeer6Table
alaBgpPeer6Addr
alaBgpPeerIpv6NextHop
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address of the next hop router.
Displays the configured IPv6 BGP peers.
March 2011
ipv6 bgp neighbor ipv6-nexthop
page 19-215