Ip Slb Admin-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Server Load Balancing Commands

ip slb admin-state

Enables or disables the administrative status for Server Load Balancing (SLB) on a switch.
ip slb admin-state {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Disabling the administrative status for the SLB feature does not delete the SLB configuration from the
switch. The next time the feature is enabled, the existing configuration becomes active.
Examples
-> ip slb admin-state enable
-> ip slb admin-state disable
Release History
Release 7.1.1; command introduced.
Related Commands
show ip slb
ip slb cluster
ip slb server ip cluster
MIB Objects
slbFeatureGroup
slbAdminStatus
OmniSwitch CLI Reference Guide
Enables the administrative status for Server Load Balancing on a
switch.
Disables the administrative status for Server Load Balancing on the
switch.
default
disable
Displays the status of Server Load Balancing on a switch.
Configures a Server Load Balancing cluster on a switch.
Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.
March 2011
ip slb admin-state
page 20-3