Ip Bgp Neighbor Activate-Ipv6 - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp neighbor activate-ipv6

ip bgp neighbor activate-ipv6
Enables or disables the exchange of IPv6 unicast routes between BGP peer routers identified by their IPv4
addresses.
ip bgp neighbor ip_address activate-ipv6
no ip bgp neighbor ip_address activate-ipv6
Syntax Definitions
ip_address
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to disable the exchange of IPv6 unicast routes between BGP peer rout-
ers identified by their IPv4 addresses.
Examples
-> ip bgp neighbor 1.0.0.1 activate-ipv6
-> no ip bgp neighbor 1.0.0.1 activate-ipv6
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip bgp neighbors
MIB Objects
alaBgpPeerTable
alaBgpPeerAddr
alaBgpPeerIpv6Unicast
page 19-194
The 32-bit IPv4 address of the neighbor.
Displays BGP peer main status.
OmniSwitch CLI Reference Guide
BGP Commands
March 2011