Ipv6 Bgp Network Local-Preference - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ipv6 bgp network local-preference

Defines the local preference value for a route generated by the ipv6 bgp network command. This value
will override the default local preference value; it is used when announcing this network to internal peers.
ipv6 bgp network ipv6_address/prefix_length [local-preference num]
Syntax Definitions
ipv6_address
/prefix_length
num
Defaults
parameter
num
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The IPv6 BGP route created with the
ence attribute is defined.
Examples
-> ipv6 bgp network 2004::1/24 local-preference 6
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 bgp network
show ipv6 bgp network
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address.
The number of bits that are significant in the IPv6 address (mask)
(3..128).
The local preference attribute value. The valid range is 0–4294967295.
default
0
ipv6 bgp network
Advertises a locally reachable IPv6 address as an IPv6 BGP net-
work to other BGP peers
Displays the status of all the IPv6 BGP networks or a specific IPv6
BGP network
March 2011
ipv6 bgp network local-preference
command should exist before the local-prefer-
page 19-205