Ipv6 Bgp Network Community - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ipv6 bgp network community

Defines a community for a route created by the ipv6 bgp network command. Communities are a way of
grouping BGP peers that do not share an IPv6 subnet or an
ipv6 bgp network ipv6_address/prefix_length [community {none | num | num:num}]
Syntax Definitions
ipv6_address
/prefix_length
none
num
num:num
Defaults
By default, a route is not assigned to a community.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The IPv6 BGP route created with the
attribute is defined.
Examples
-> ipv6 bgp network 2004::2/64 community 23:20
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 bgp network
show ipv6 bgp network
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address.
The number of bits that are significant in the IPv6 address (mask)
(3..128).
Removes a prefix from a community.
The community attribute number.
Community attribute in the AA : NN format. AA indicates the autono-
mous system and NN indicates the community number.
ipv6 bgp network
Advertises a locally reachable IPv6 address as an IPv6 BGP net-
work to other BGP peers.
Displays the status of all the IPv6 BGP networks or a specific IPv6
BGP network
March 2011
ipv6 bgp network community
AS.
command should exist before the community
page 19-203