Show Ipv6 Bgp Network - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ipv6 bgp network

show ipv6 bgp network
Displays the status of all the IPv6 BGP networks or a specific IPv6 BGP network.
show ipv6 bgp network [ipv6_address/prefix_length]
Syntax Definitions
ipv6_address
/prefix_length
Defaults
By default, all IPv6 BGP networks and their status will be displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the ipv6_address/prefix_length parameter to display the status of a specific IPv6 BGP nework.
Examples
show ipv6 bgp network
Network
------------------------------------+-----------+----------
2525:500:600::/64
show ipv6 bgp network 2525:500:600::/64
Network address
Network admin state
Network oper state
Network metric
Network local preference = 0,
Network community string = <none>
output definitions
Network or Network address
Admin state or Network admin
state
Oper state or Network oper
state
page 19-210
The 128-bit IPv6 address.
The number of bits that are significant in the IPv6 address (mask)
(3..128).
Admin state Oper state
enabled
= 2525:500:600::/64,
= enabled,
= active,
= 0,
The IPv6 address configured for this local BGP network. This value is
configured through the
Indicates whether this local BGP network is administratively enabled
or disabled. This value is configured through the
ipv6 bgp network admin-state
Indicates whether this BGP local network is operationally active or
inactive.
active
ipv6 bgp network command.
command.
OmniSwitch CLI Reference Guide
BGP Commands
March 2011