Ip Slb Probe - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Server Load Balancing Commands

ip slb probe

Configures a Server Load Balancing (SLB) probe used to check the health of servers or clusters.
ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp}
no ip slb probe probe_name
Syntax Definitions
probe_name
ftp
http
https
imap
imaps
nntp
ping
pop
pops
smtp
tcp
udp
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete an SLB probe.
Examples
-> ip slb probe mail_server_probe smtp
-> no ip slb probe mail_server_probe
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies an FTP probe.
Specifies an HTTP probe.
Specifies an HTTPS probe.
Specifies an IMAP probe.
Specifies an IMAPS probe.
Specifies an NNTP probe.
Specifies a ping probe.
Specifies a POP probe.
Specifies a POPS probe.
Specifies an SMTP probe.
Specifies a TCP probe.
Specifies a UDP probe.
March 2011
ip slb probe
page 20-17