Server Load Balancing Commands
ip slb probe send
Configures an ASCII string that is sent to a server to invoke a server response and verify the health of the
server.
ip slb probe probe_name {tcp | udp} send send_string
Syntax Definitions
probe_name
tcp
udp
send_string
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
NA
Examples
-> ip slb probe web_server tcp send test
Release History
Release 7.1.1; command introduced.
Related Commands
ip slb probe
show ip slb probes
MIB Objects
slbProbeTable
slbProbeName
slbProbeMethod
slbProbeSend
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies a TCP probe.
Specifies a UDP probe.
Specifies the ASCII string sent to a server to invoke a response.
Configures and deletes SLB probes.
Displays the configuration of SLB probes.
March 2011
ip slb probe send
page 20-31