Display Mpls Static-Lsp - 3Com 8807 Command Reference Manual

display mpls static-lsp

Description
Use the display mpls lsp command to display LSP information.
By default, the display mpls lsp command displays all LSP information.
Related command: display mpls interface, display mpls statistics and display
static-lsp.
Example
# Display all the LSPs including "-----------".
<SW8800> display mpls lsp include -----
-------------------------------------------------------------------
LSP Information: Ldp
NO FEC
1 10.110.1.0/24
2 10.10.10.0/24
3 10.100.20.20/32
4 5.5.5.5/32
5 10.100.20.0/24
6 80.80.80.80/32
7 70.70.70.70/32
TOTAL: 7 Record(s) Found.
Syntax
display mpls static-lsp [ include text | verbose ]
View
Any view
Parameter
include text: Displays the matching string including the specified information .
verbose: Displays detailed information.
Description
Use the display mpls static-lsp command to view the information of one static
LSP or all.
Related command: display mpls interface, display mpls lsp and display mpls
statistics.
Example
# Display the static LSP information.
<SW8800> display mpls static-lsp
--------------------------------------------------------------------
LSP Information: Static Lsp
--------------------------------------------------------------------
MPLS Basic Configuration Commands
Lsp
NEXTHOP I/O-LABEL
10.110.1.1 3/-----
10.10.10.1 3/-----
127.0.0.1 3/-----
127.0.0.1 3/-----
10.100.20.20 3/-----
127.0.0.1 3/-----
200.5.5.4 -----/3
683
OUT-INTERFACE
-------
-------
-------
-------
-------
-------
Vlan2000