3Rd Clutch Transmission Fluid Pressure Switch Replacement; 4Th Clutch Transmission Fluid Pressure Switch Replacement - Honda 2004 Odyssey Service Manual

3rd Clutch Transmission Fluid
Pressure Switch Replacement
1. Remove the switch cover (A).
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
C
B
20 N·m
(2.0 kgf·m, 14 lbf·ft)
2. Disconnect the connector from the 3rd clutch
transmission fluid pressure switch (B).
3. Replace the 3rd clutch transmission fluid pressure
switch, then install a new one with a new sealing
washer (C). Tighten the switch on the metal part,
not the plastic part.
4. Reconnect the connector, making sure there is no
water, oil, dust, or other foreign particles inside it.
5. Install the switch cover.
A
4th Clutch Transmission Fluid
Pressure Switch Replacement
1. Disconnect the connector from the 4th clutch
transmission fluid pressure switch (A).
2. Replace the 4th clutch transmission fluid pressure
switch, then install a new one with a new sealing
washer (B). Tighten the switch on the metal part,
not the plastic part.
3. Reconnect the connector, making sure there is no
water, oil, dust, or other foreign particles inside it.
B
A
20 N·m
(2.0 kgf·m, 14 lbf·ft)
14-365 14-365