Password-Attributes - Dell S6100 Configuration Manual

password
Defaults No password is configured.
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information Dell Networking OS prompts users for these passwords when the method for authentication or authorization used
is "line".
Related Commands
•
•
•
•
•
•

password-attributes

Configure the password attributes (strong password).
Syntax password-attributes [min-length number] [max-retry number] [lockout-period
minutes][character-restriction [upper number] [lower number] [numeric number]
[special-char number]]
1398 Security
• 7 means that the password is encrypted and hidden.
Enter a text string up to 32 characters long. The first character of the password must be
a letter. You cannot use spaces in the password.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
enable password — sets the password for the enable command.
login authentication — configures an authentication method to log in to the switch.
service password-encryption
radius-server key — configures a key for all RADIUS communications between the switch and the RADIUS
host server.
tacacs-server key — configures a key for communication between a TACACS+ server and client.
username — establishes an authentication system based on user names.
— encrypts all passwords configured in Dell Networking OS.