Show Isis Neighbors - Dell Z9500 Command Reference Manual

TenGigabitEthernet 1/8 is up, line protocol is up
--More--

show isis neighbors

Display information about neighboring (adjacent) routers.
Z9500
Syntax
show isis [vrf vrf-name] neighbors [level-1 | level-2] [detail]
[interface]
Parameters
vrf vrf-name
level-1
level-2
detail
interface
Command
•
Modes
•
Intermediate System to Intermediate System (IS-IS)
MTU 1497, Encapsulation SAP
Routing Protocol: IS-IS
Circuit Type: Level-1-2
Interface Index 38371358, Local circuit ID 2
Level-1 Metric: 10, Priority: 64, Circuit ID: systest-3.02
Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
Number of active level-1 adjacencies: 1
Level-2 Metric: 10, Priority: 64, Circuit ID: systest-3.02
Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to display adjacent router information
corresponding to that VRF.
(OPTIONAL) Displays information about Level 1 IS-IS
neighbors.
(OPTIONAL) Displays information about Level 2 IS-IS
neighbors.
(OPTIONAL) Displays detailed information about neighbors.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
EXEC
EXEC Privilege
1121