Exec-Banner; Hardware Profile Portmode - Dell Networking 7048 Reference Manual

Example
console(config)#cut-through mode
The mode (enable) is effective from the next reload of Switch/Stack.

exec-banner

Use the exec-banner command to enable exec banner on the console, telnet
or SSH connection. To disable, use the no form of the command.
Syntax
exec-banner
no exec-banner
MESSAGE — Quoted text
•
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
The exec banner can consist of multiple lines. Enter a quote to complete the
message and return to configuration mode.
Example
console(config-telnet)# no exec-banner

hardware profile portmode

Use the hardware profile portmode command in Interface Config mode to
configure a 40G port in 4x10G mode or 1x40G mode.
Use the no form of the command to return the port to the default mode
(1x40G).
1650
System Management Commands