Input Statistics:
...
User
Both sides of the link must have auto-negotiation enabled or disabled for the link
Information
to come up.
The following details the possible speed and auto-negotiation combinations for a
line between two 10/100/1000 Base-T Ethernet interfaces.
Port 0
•
•
•
•
•
Port 1
•
•
•
•
•
Link Status Between Port 1 and Port 2
•
•
•
•
•
* You cannot disable auto-negotiation when the speed is set to 1000 or auto.
portmode hybrid
To accept both tagged and untagged frames, set a physical port or port-channel. A port configured this
way is identified as a hybrid port in report displays.
S6000
Syntax
portmode hybrid
To return a port to accept either tagged or untagged frames (non-hybrid), use the
no portmode hybrid command.
Defaults
non-hybrid
Command
INTERFACE (conf-if-interface-slot/port)
Modes
Interfaces
auto-negotiation enabled* speed 1000 or auto
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
auto-negotiation disabled speed 100
auto-negotiation enabled* speed 1000 or auto
auto-negotiation enabled* speed 1000 or auto
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
Up at 1000 Mb/s
Up at 100 Mb/s
Up at 100 Mb/s
Down
Down
659