Bgp Non-Deterministic-Med - Dell Z9500 Reference Manual

Version
9.2(1.0)
8.3.11.1
7.8.1.0
7.7.1.0
Usage
To view BGP neighbor resets, use the show logging command in EXEC mode.
Information
The bgp log-neighbor-changes command appears in the show config
command output.
Related show logging
Commands

bgp non-deterministic-med

Compare MEDs of paths from different autonomous systems.
Z9500
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do
not have their MEDs compared).
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage
In Non-Deterministic mode, paths are compared in the order in which they arrive.
Information
This method can lead the system to choose different best paths from a set of
paths, depending on the order in which they are received from the neighbors
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
— views logging settings and system messages logged to the system.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
359