Bgp Non-Deterministic-Med - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

restart-time

stale-path-time

role receiver-

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.7.1.0

This feature is advertised to BGP neighbors through a capability advertisement. In

Receiver Only mode, BGP saves the advertised routes of peers that support this

capability when they restart.

BGP graceful restart is active only when the neighbor becomes established.

Otherwise it is disabled. Graceful-restart applies to all neighbors with established

This command automatically restarts the BGP instance for the configuration to

take effect.

bgp non-deterministic-med

Compare MEDs of paths from different autonomous systems.

bgp non-deterministic-med

To return to the default, use the no bgp non-deterministic-med command.

Border Gateway Protocol

Enter the keyword restart-time then the maximum

number of seconds to restart and bring-up all the peers. The

range is from 1 to 3600 seconds. The default is 120 seconds.

Enter the keyword stale-path-time then the maximum

number of seconds to wait before restarting a peer's stale

paths. The default is 360 seconds.

Enter the keyword role receiver-only to designate the

local router to support graceful restart as a receiver only.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.