show system autoinstallation status
Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
show system
show system
autoinstallation status
autoinstallation status
show system autoinstallation status
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display autoinstallation status information.
This command has no options.
view
show system autoinstallation status on page 117
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 0.0.0.0
Interface:
Name: fe-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Chapter 10: Operational Mode Commands for Software Installation
117