Show Inventory - Dell Z9500 Reference Manual

(W)
--------------------------------------------------------------
Dell#show environment fan
--
Unit
------------------------------------------------------
Speed in RPM
Dell#show environment thermal-sensors
--
Module
S6
---------------------------------------------------------------
------------------------------------
System Core
25
Switching Core
-
Port Modules
78
Threshold crossed [m]: minor [M]: major, [S]: shutdown

show inventory

Display the S-Series or Z-Series switch type, components (including media), and Dell Networking
Operating System (OS), including hardware identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
media slot
Defaults none
Control and Monitoring
0 0 down AC
0 1 up AC
0 2 down AC
0 3 up AC
Fan Status --
Bay TrayStatus
0 0 up
0 1 up
0 2 up
0 3 up
0 4 up
Thermal Sensor Readings (deg C)
S0
S7 S8
33
36 39
100[M] 46
- -
49
55 53
(OPTIONAL) Enter the keyword media then the stack ID of
the stack member for which you want to display pluggable
media inventory.
up 1376
up 18848
up 1312
up 18880
Fan0 Speed
up 5263
up 5274
up 5256
up 5278
up 5270
--
S1 S2
S9 S10
33 34
39 -
47
- -
101[M] 60
50 46
NOTE: This parameter is available but not supported in
Dell Networking Operating System version 8.3.11.4.
Because stacking is not supported, if you use this
parameter, the output displays "Media not present or
accessible" (refer to the Usage Information section).
0.0
666.0
0.0
643.0
Fan1 Speed
up 5292
up 5317
up 5292
up 5328
up 5320
S3 S4 S5
33 28 39
45 44 45
49 62 52
139