Show Inventory - Dell S4810 Reference Manual

--
Unit Bay
---------------------------------------------------------------
---------------------
0
0
0
Speed in RPM
Dell#show environment pem
--
Unit
---------------------------------------------------------------
------------
Dell#show environment thermal-sensor
--
Unit
Sensor6
---------------------------------------------------------------
--------------------
31

show inventory

Display the S-Series or Z-Series switch type, components (including media), and Dell Networking
Operating System (OS), including hardware identification numbers and configured protocols.
S4810
Syntax
show inventory [media slot]
Parameters
media slot
Defaults none
136
Fan Status --
TrayStatus
0 up
1 up
2 up
Power Supplies
Bay Status
0 0 down
0 1 up
Thermal Sensor Readings (deg C)
Sensor0 Sensor1
0 39 36
46
(OPTIONAL) Enter the keyword media then the stack ID of
the stack member for which you want to display pluggable
media inventory.
Fan0 Speed
up 7021
up 6971
up 7021
--
Type FanStatus
UNKNOWN
AC
--
Sensor2 Sensor3
37 37
NOTE: This parameter is available but not supported in
Dell Networking Operating System version 8.3.11.4.
Because stacking is not supported, if you use this
parameter, the output displays "Media not present or
accessible" (refer to the Usage Information section).
Fan1 Speed
up 7021
up 7072
up 6971
FanSpeed(rpm)
down 0
up 6504
Sensor4 Sensor5
31
Control and Monitoring