Show Inventory - Dell C9000 Series Reference Manual

Switching Core 100[M] 46
Port Modules
Threshold crossed [m]: minor [M]: major, [S]: shutdown
Example (PE
Dell#show environment stack-unit
Console)
-- Unit Environment Status
Unit
------------------------------------
* 1
* Management Unit

show inventory

Display the switch type, components (including media), and Dell Networking OS version, including hardware
identification numbers and configured protocols.
C9000 Series
Syntax
show inventory [media [slot-id | pe pe-id [stack-unit unit-
number]]| pe pe-id]]
From a PE console, use show inventory [media] to view the PE inventory
information.
Parameters
media slot-id
pe pe-id
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
49 101[M] 60
Status Temp
online 28C
(OPTIONAL) Enter the keyword media to display pluggable
media inventory for a specified line-card slot. Valid slot IDs are
from 0 to 2.
(OPTIONAL) Enter the keyword pe to display port extender (PE)
inventory for a specified PE ID. Range is from 0 to 255.
NOTE:
extended bridge feature is enabled.
47 45 44 45 -
49 62 52 78
--
Voltage
ok
The pe option is only available when the
- - - -
55 53 50 46
Control and Monitoring 133