Removing The Ncu Pcb (Fax Model Only); Removing The Off Hook Pcb (Fax Model Only) - Canon D1300 Series Service Manual

4
Disassembly/Assembly > Controller System > Removing the OFF Hook PCB (FAX Model Only)

Removing the NCU PCB (FAX Model Only)

Preparations
1) Removing the Left Cover Unit.
2) Removing the Controller Cover.
Procedure
1) Remove the Flat Cable [1] and the Connectors [2].
• 1 Wire saddle [3]
x3
2) Remove the NCU PCB [1].
• 3 Screws [2]
x4
4 Disassembly/Assembly > Controller System > Removing the OFF Hook PCB (FAX Model Only)
[1]
[2] [3]
F-4-105
[2] [1]
[2]
[2]
F-4-106

Removing the OFF Hook PCB (FAX Model Only)

Preparations
1) Removing the Left Cover Unit.
2) Removing the Controller Cover.
Procedure
1) Remove the OFF Hook PCB [1].
• 1 Wire Saddle [2]
• 1 Connector [3]
• 2 Screws [4]
[2]
x2
[3]
4-44
[1]
[4]
F-4-107
4-44