NEC Univerge sv8500 Manual page 1713

17.5.4 Error Messages
When an error occurs while using a configuration command, an error message prompting for re-registration is
displayed.
ERROR MESSAGE
Illegal command.
Illegal parameters.
Illegal parameters. (Not IPv6 address)
Illegal parameters. (Not IPv4 address)
Refer to each command for the other error messages.
An incorrect command is entered. Enter the command correctly.
An incorrect parameter is entered. Enter the parameter correctly.
An incorrect parameter is entered. Enter the IPv6 parameter correctly.
An incorrect parameter is entered. Enter the IPv4 parameter correctly.
VOL.2-1460
MG-SIP128 [MG-128SIPMGG]
TROUBLESHOOTING