NEC Univerge sv8500 Manual page 1728

Input Port Number. (1024-65535(default=3456)
:3456
[Quaternary DRS Setting]
Input IP address. (default=0.0.0.0)
:0.0.0.0
Input Port Number. (1024-65535(default=3456)
:3456
Note:
To make this assignment effective, it is required to execute the "REBOOT" command to save the
configuration and restart the MG-SIP128 [MG-128SIPMGJ].
18.3.4 Setting of SIP Server Data
<When using Multipoint Feature (Point-to-point Connection)>
When Multipoint Feature is used, the setting of SIP Server Data is not required.
<When not using Multipoint Feature (Point-to-multipoint Connection)>
Set the IP address or FQDN, and port number, type, and SIP domain of a SIP proxy server. (FQDN=Fully Qual-
ified Domain Name)
* When MG-SIP Simplified TIE Line is used, assign the IP address of the destination MG-SIP to SIP server
address.
The following figure shows an example of display.
When IP address (=0) is selected:
MG(SIP) > set sip_server
Select SIP server type.
0=IPAddress(default)
1=FQDN
Input:0
Input SIP server IP Address.(default=0.0.0.0)
Input SIP server Port Number.
(1024-65535(default=5060)):5060
Select SIP server Router type.
0=Strict(default)
1=Loose
:192.168.100.100
VOL.2-1475
MG-SIP128 [MG-128SIPMGJ]
Has not been set.
Select IP address (Default=0).
Assign the IP address of the proxy
server (Default: 0.0.0.0).
Assign the port number of the proxy
server (Default: 5060)
Select a Strict router or Loose router for
the proxy server (Default: 0).
0: Strict router
1: Loose router