Safety Notices - Keysight x-series User Reference Manual

Notices
© Keysight Technologies, Inc.
2010-2014
No part of this manual may be
reproduced in any form or by any
means (including electronic
storage and retrieval or
translation into a foreign
language) without prior
agreement and written consent
from Keysight Technologies, Inc.
as governed by United States and
international copyright laws.
Acknowledgments
Adobe Acrobat® and Reader®
are U.S. registered trademarks of
Adobe Systems Incorporated.
Manual Part Number
N6141-90001
Edition
August 2014
Printed in USA
Keysight Technologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403
Warranty
The material contained in this
document is provided "as is," and
is subject to being changed,
without notice, in future editions.
Further, to the maximum extent
permitted by applicable law,
Keysight disclaims all warranties,
either express or implied, with
regard to this manual and any
information contained herein,
including but not limited to the
implied warranties of
merchantability and fitness for a
particular purpose. Keysight shall
not be liable for errors or for
incidental or consequential
ii
damages in connection with the
furnishing, use, or performance of
this document or of any
information contained herein.
Should Keysight and the user
have a separate written
agreement with warranty terms
covering the material in this
document that conflict with these
terms, the warranty terms in the
separate agreement shall control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may
be used or copied only in
accordance with the terms of such
license.
Restricted Rights
Legend
If software is for use in the
performance of a U.S.
Government prime contract or
subcontract, Software is delivered
and licensed as "Commercial
computer software" as defined in
DFAR 252.227-7014 (June 1995),
or as a "commercial item" as
defined in FAR 2.101(a) or as
"Restricted computer software"
as defined in FAR 52.227-19 (June
1987) or any equivalent agency
regulation or contract clause.
Use, duplication or disclosure of
Software is subject to Keysight
Technologies' standard
commercial license terms, and
non-DOD Departments and
Agencies of the U.S. Government
will receive no greater than
Restricted Rights as defined in
FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will
receive no greater than Limited
Rights as defined in FAR 52.227-
14 (June 1987) or DFAR 252.227-
7015 (b)(2) (November 1995), as
applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It calls
attention to an operating procedure, practice,
or the like that, if not correctly performed or
adhered to, could result in damage to the
product or loss of important data. Do not
proceed beyond a CAUTION notice until the
indicated conditions are fully understood and
met.
A WARNING notice denotes a hazard. It calls
attention to an operating procedure,
practice, or the like that, if not correctly
performed or adhered to, could result in
personal injury or death. Do not proceed
beyond a WARNING notice until the indicated
conditions are fully understood and met.
EMI Receiver Mode Reference